20:00

PDF|

Guide for Cloudera-CCA-505

Quiz Cloudera-CCA-505

10/45 Questions|Updated on 2022/11/04
Free Test
/ 10

Quiz

1/10
Given: Exam Dumps Cloudera-CCA-505 Cloudera Cloudera-CCA-505 2 You want to clean up this list by removing jobs where the state is KILLED. What command you enter?
Select the answer
1 correct answer
A.
Yarn application –kill application_1374638600275_0109
B.
Yarn rmadmin –refreshQueue
C.
Yarn application –refreshJobHistory
D.
Yarn rmadmin –kill application_1374638600275_0109

Quiz

2/10
You have installed a cluster running HDFS and MapReduce version 2 (MRv2) on YARN. You have no afs.hosts entry()ies in your hdfs-alte.xml configuration file. You configure a new worker node by setting fs.default.name in its configuration files to point to the NameNode on your cluster, and you start the DataNode daemon on that worker node. What do you have to do on the cluster to allow the worker node to join, and start storing HDFS blocks?
Select the answer
1 correct answer
A.
Nothing; the worker node will automatically join the cluster when the DataNode daemon is started.
B.
Without creating a dfs.hosts file or making any entries, run the command hadoop dfsadmin – refreshHadoop on the NameNode
C.
Create a dfs.hosts file on the NameNode, add the worker node’s name to it, then issue the command hadoop dfsadmin –refreshNodes on the NameNode
D.
Restart the NameNode

Quiz

3/10
Assuming a cluster running HDFS, MapReduce version 2 (MRv2) on YARN with all settings at their default, what do you need to do when adding a new slave node to a cluster?
Select the answer
1 correct answer
A.
Nothing, other than ensuring that DNS (or /etc/hosts files on all machines) contains am entry for the new node.
B.
Restart the NameNode and ResourceManager deamons and resubmit any running jobs
C.
Increase the value of dfs.number.of.needs in hdfs-site.xml
D.
Add a new entry to /etc/nodes on the NameNode host.
E.
Restart the NameNode daemon.

Quiz

4/10
You have a 20 node Hadoop cluster, with 18 slave nodes and 2 master nodes running HDFS High Availability (HA). You want to minimize the chance of data loss in you cluster. What should you do?
Select the answer
1 correct answer
A.
Add another master node to increase the number of nodes running the JournalNode which increases the number of machines available to HA to create a quorum
B.
Configure the cluster’s disk drives with an appropriate fault tolerant RAID level
C.
Run the ResourceManager on a different master from the NameNode in the order to load share HDFS metadata processing
D.
Run a Secondary NameNode on a different master from the NameNode in order to load provide automatic recovery from a NameNode failure
E.
Set an HDFS replication factor that provides data redundancy, protecting against failure

Quiz

5/10
You decide to create a cluster which runs HDFS in High Availability mode with automatic failover, using Quorum-based Storage. What is the purpose of ZooKeeper in such a configuration?
Select the answer
1 correct answer
A.
It manages the Edits file, which is a log changes to the HDFS filesystem.
B.
It monitors an NFS mount point and reports if the mount point disappears
C.
It both keeps track of which NameNode is Active at any given time, and manages the Edits file, which is a log of changes to the HDFS filesystem
D.
It only keeps track of which NameNode is Active at any given time
E.
Clients connect to ZoneKeeper to determine which NameNode is Active

Quiz

6/10
During the execution of a MapReduce v2 (MRv2) job on YARN, where does the Mapper place the intermediate data each Map task?
Select the answer
1 correct answer
A.
The Mapper stores the intermediate data on the mode running the job’s ApplicationMaster so that is available to YARN’s ShuffleService before the data is presented to the Reducer
B.
The Mapper stores the intermediate data in HDFS on the node where the MAP tasks ran in the HDFS / usercache/&[user]sppcache/application_&(appid) directory for the user who ran the job
C.
YARN holds the intermediate data in the NodeManager’s memory (a container) until it is transferred to the Reducers
D.
The Mapper stores the intermediate data on the underlying filesystem of the local disk in the directories yarn.nodemanager.local-dirs
E.
The Mapper transfers the intermediate data immediately to the Reducers as it generated by the Map task

Quiz

7/10
Which Yarn daemon or service monitors a Container’s per-application resource usage (e.g, memory, CPU)?
Select the answer
1 correct answer
A.
NodeManager
B.
ApplicationMaster
C.
ApplicationManagerService
D.
ResourceManager

Quiz

8/10
You are planning a Hadoop cluster and considering implementing 10 Gigabit Ethernet as the network fabric. Which workloads benefit the most from a faster network fabric?
Select the answer
1 correct answer
A.
When your workload generates a large amount of output data, significantly larger than amount of intermediate data
B.
When your workload generates a large amount of intermediate data, on the order of the input data itself
C.
When workload consumers a large amount of input data, relative to the entire capacity of HDFS
D.
When your workload consists of processor-intensive tasks

Quiz

9/10
For each YARN Job, the Hadoop framework generates task log files. Where are Hadoop’s files stored?
Select the answer
1 correct answer
A.
In HDFS, In the directory of the user who generates the job
B.
On the local disk of the slave node running the task
C.
Cached In the YARN container running the task, then copied into HDFS on fob completion
D.
Cached by the NodeManager managing the job containers, then written to a log directory on the NameNode

Quiz

10/10
You are the hadoop fs –put command to add a file "sales.txt” to HDFS. This file is small enough that it fits into a single block, which is replicated to three nodes in your cluster (with a replication factor of 3). One of the nodes holding this file (a single block) fails. How will the cluster handle the replication of this file in this situation/
Select the answer
1 correct answer
A.
The cluster will re-replicate the file the next time the system administrator reboots the NameNode daemon (as long as the file’s replication doesn’t fall two)
B.
This file will be immediately re-replicated and all other HDFS operations on the cluster will halt until the cluster’s replication values are restored
C.
The file will remain under-replicated until the administrator brings that nodes back online
D.
The file will be re-replicated automatically after the NameNode determines it is under replicated based on the block reports it receives from the DataNodes
Looking for more questions?Buy now

Cloudera-CCA-505 Practice test unlocks all online simulator questions

Thank you for choosing the free version of the Cloudera-CCA-505 practice test! Further deepen your knowledge on Cloudera Simulator; by unlocking the full version of our Cloudera-CCA-505 Simulator you will be able to take tests with over 45 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 45 questions.

BUY NOW

What to expect from our Cloudera-CCA-505 practice tests and how to prepare for any exam?

The Cloudera-CCA-505 Simulator Practice Tests are part of the Cloudera Database and are the best way to prepare for any Cloudera-CCA-505 exam. The Cloudera-CCA-505 practice tests consist of 45 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The Cloudera-CCA-505 database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with Cloudera-CCA-505 Simulator will also give you an idea of the time it will take to complete each section of the Cloudera-CCA-505 practice test . It is important to note that the Cloudera-CCA-505 Simulator does not replace the classic Cloudera-CCA-505 study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the Cloudera-CCA-505 exam.

BUY NOW

Cloudera-CCA-505 Practice test therefore represents an excellent tool to prepare for the actual exam together with our Cloudera practice test . Our Cloudera-CCA-505 Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our Cloudera-CCA-505 Simulator and how our unique Cloudera-CCA-505 Database made up of real questions:

Info quiz:

  • Quiz name:Cloudera-CCA-505
  • Total number of questions:45
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the Cloudera-CCA-505 exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our Cloudera-CCA-505 Simulator.

Use our Mobile App, available for both Android and iOS devices, with our Cloudera-CCA-505 Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all Cloudera-CCA-505 practice tests which consist of 45 questions and also provide study material to pass the final Cloudera-CCA-505 exam with guaranteed success. Our Cloudera-CCA-505 database contain hundreds of questions and Cloudera Tests related to Cloudera-CCA-505 Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW